Repair and Restoration

Watch Restoration for Beginners: Tools and First Projects

A beginner's guide to watch restoration: the tools to buy, safe first projects like straps and batteries, and when a watch needs a professional.

On this page
  1. What Watch Restoration Means
  2. Assess the Watch Before You Touch It
  3. Essential Tools for a Starter Kit
  4. Set Up a Clean Workspace
  5. Safe First Projects
  6. Intermediate Work: Hands, Crystals and Dials
  7. Mechanical Movements: Learn Before You Open One
  8. When to Hand the Watch to a Professional
  9. Where to Go Next
  10. How to Set a Watch for the First Time

Watch restoration means bringing a worn or neglected watch back to good condition. It can be cosmetic work only, such as cleaning a case or replacing a strap. It can also be functional work, such as replacing a battery, gasket or crystal, or servicing a movement so the watch keeps time again.

A beginner’s kit is mostly about patience and a clean workspace. You need a few specialised tools, a sensible order of projects, and a clear idea of when to stop. This guide covers each of those.

What Watch Restoration Means

Three words are often used loosely, so it helps to separate them:

  • Cleaning removes dirt and oil from the outside of the watch: the case, crystal and bracelet. It is usually safe for owners to do.
  • Servicing means opening the movement to clean, lubricate and adjust it. This is professional work.
  • Repair fixes a specific fault, such as a broken stem or a cracked dial. Repairs range from simple to very difficult.

Restoration usually combines these. A beginner should focus on cleaning and simple parts work, and leave movement overhaul until they have practised on inexpensive parts.

Assess the Watch Before You Touch It

Check a few things before you open anything:

  • Water resistance. Opening the case breaks the factory seal. Restoration does not restore a water-resistance rating unless a pressure test confirms it afterwards.
  • Type of movement. A quartz watch has a battery and electronics. An automatic or hand-wind mechanical watch has springs under tension and delicate balance parts. Each needs different care.
  • Visible damage. Look for moisture under the crystal, a loose or damaged crown, a chipped crystal, or corrosion. Moisture and corrosion are signs to stop and get professional help.
  • Value and sentiment. Vintage and high-value watches can lose value after polishing or part replacement. If a watch matters to you financially or emotionally, consider a professional first. The guide to telling if a pocket watch is worth money explains how value is judged.

Essential Tools for a Starter Kit

What are the tools in a watch repair kit? A beginner kit usually includes a case back opener, a spring bar tool, fine tweezers, a set of small screwdrivers, a loupe or magnifier, pegwood, a hand puller, a dial protector and a bulb blower. Add soft microfiber cloths and a clean, well-lit surface.

Here is what each one does:

  • Case back opener. Case backs come in different designs, such as snap-on and screw-down. A wrong tool can scratch the case or slip, so match the tool to the case.
  • Spring bar tool. Removes and fits strap and bracelet spring bars.
  • Tweezers. Fine, non-magnetic tips help hold small parts. Keep them clean and store them so the tips do not close against each other.
  • Screwdrivers. Watch screws are tiny. Use a set with a precise fit and never force a screw.
  • Loupe. A 10x magnifier is a common choice for inspection work.
  • Pegwood. Soft wooden sticks for holding and cleaning without scratching.
  • Hand puller. Removes hands with even, vertical pressure. The guide to removing and refitting watch hands explains how.
  • Dial protector. A thin plastic sheet that protects the dial while you work.
  • Bulb blower. Removes loose dust from a case or movement.

You can leave some tools until later. A lathe, a movement holder and a full ultrasonic cleaner are not needed for your first projects. Buy tools as a specific job calls for them, and ask experienced hobbyists before you buy anything expensive.

Set Up a Clean Workspace

Work on a clean, flat, well-lit surface. A soft mat or felt pad protects the watch and the dial. Keep a magnetic tray or a shallow dish for screws, and label small containers for parts. A light-coloured cloth makes tiny parts easier to see. Avoid carpet, where a dropped screw can disappear.

Keep watches away from strong magnets, and do not use magnetised tools near movement parts. A magnetised hairspring can change how a watch runs.

Safe First Projects

Start with jobs that carry the least risk, and work through them roughly in this order.

Replacing a Strap or Bracelet Pin

Spring bars hold a strap or bracelet in place. Removing one is one of the easiest first skills. Use a spring bar tool, press the bar in at one end, and lift it out. Match the strap width to the lugs. A good first project is changing the strap on an inexpensive watch.

Replacing a Quartz Battery

Battery replacement is a common first job, but it has risks. When you open the back, check the gasket. A worn or dried gasket can let in moisture. Use the battery type listed for your model, and set the time and date again afterwards. If you see moisture or corrosion, stop and have a professional check the watch. The Casio restoration guide walks through a common digital case.

Cleaning the Case and Bracelet

External cleaning removes oil, sweat and dust. Use a soft, lint-free cloth. For a water-resistant watch with a metal bracelet, a mild soap solution can be used only where the manufacturer allows it, and the case should stay as dry as possible. The guide to the best thing to clean watches with covers what to use and what to avoid.

Light Case Polishing

Light scratches on a polished steel case can sometimes be reduced with a polishing cloth. Brushed finishes need work that follows the grain. Check a plated or vintage case before polishing, because polishing can remove plating and reduce value. The polishing guide covers the method and the risks.

Intermediate Work: Hands, Crystals and Dials

After a few straps, batteries and cleanings, you can try harder tasks.

  • Hands. Removing and refitting hands is useful but easy to get wrong. A bent hand or a scratched dial is hard to undo. Practise on a donor movement first.
  • Crystals. Acrylic crystals can often be polished or replaced. Mineral and sapphire crystals usually need replacing when deeply scratched. A proper crystal press helps most replacements seat well.
  • Dials. Dials can scratch, fade or lift. Vintage dials may have older luminous paint. Do not scrape or sand a dial without advice.

Mechanical Movements: Learn Before You Open One

Mechanical movements are the most rewarding part of the hobby and the least forgiving. A movement has hundreds of small parts, a hairspring finer than a human hair, and lubricants that must go in exactly the right places. Opening one without training usually causes damage.

If you want to learn movement work:

  1. Practise on donor movements. Inexpensive, non-working movements can be taken apart and reassembled without risking a watch you care about.
  2. Learn the parts. Study the mainspring, barrel, gear train, escapement and balance, and how they connect.
  3. Take a course. Formal watchmaking courses exist, including some run through recognised horological bodies. Choose one that includes practical bench work.
  4. Use a timing tool. A timing machine shows whether a repair changed the rate. Read the timegrapher guide before you buy one.

Mainsprings store a lot of energy, so read the mainspring guide before you handle one. Movement cleaning is also professional work, and the movement cleaning article explains why.

When to Hand the Watch to a Professional

Some jobs are better left to a qualified watchmaker. Consider a professional when:

  • the watch is valuable, vintage or sentimental
  • you see moisture or corrosion inside the crystal
  • the watch needs a full movement service
  • the crown or stem is damaged
  • the watch is water resistant and needs a pressure test
  • the work could change the watch’s value

A professional service includes checks that are hard to do at home. The service interval guide explains how often a mechanical watch usually needs attention.

Where to Go Next

Your next steps depend on what you own. Pocket watch owners might start with the pocket watch size guide and the mainspring guide. Wristwatch owners may prefer the Casio restoration article, or the pros and cons of converting a mechanical watch to quartz if they are considering a swap.

How to Set a Watch for the First Time

If you have just acquired a watch that has sat unused for years, set it before you judge whether it works. Identify whether it is quartz, automatic or hand-wind, give it power, set the date away from midnight, then set the time. The full steps are in how to set a watch for the first time.

Keep exploring

Guides from other topics

All topics →