Repair and Restoration

What is the best thing to clean watches with?

A soft microfiber cloth is the best everyday choice. Use mild soap or a watch-safe cleaner sparingly, and only where the manufacturer allows it.

On this page
  1. What to Use for Everyday Cleaning
  2. Check Water Resistance Before Using Any Liquid
  3. Cleaning a Metal Bracelet
  4. Cleaning a Leather or Fabric Strap
  5. Cleaning a Rubber or Resin Strap
  6. Cleaning the Case and Crystal
  7. What to Avoid
  8. What About Watch Cleaning Kits?
  9. The Inside of the Watch Is Not a DIY Job
  10. How Often to Clean
  11. When Cleaning Is Not Enough

A soft microfiber cloth is the best everyday choice for cleaning a watch. Use mild soap or a watch-specific cleaner sparingly, and only where the manufacturer allows it. Keep harsh chemicals and abrasives away from the watch, and never let liquid get into the case.

What to Use for Everyday Cleaning

  • A soft, lint-free microfiber cloth. Removes fingerprints, sweat and light dust. Wipe the watch when you take it off.
  • A soft brush. A soft-bristled toothbrush or horsehair brush reaches between bracelet links and around the clasp.
  • Mild soap and lukewarm water. A tiny amount of gentle dish soap on a damp cloth or brush works for bracelets and cases, if the watch is rated for water and the manufacturer permits it.
  • A watch-specific cleaning foam or gel. These are made for watch cases and bracelets. Follow the label and wipe away any residue.

Check Water Resistance Before Using Any Liquid

Before you use water or soap, check two things:

  • The rating. A water resistance rating is not a permanent guarantee. Seals age, and they can fail after years of wear or after earlier service.
  • The manufacturer’s guidance. If the manual says not to use water, follow it.

If you are unsure, keep the watch dry and use a lightly dampened cloth on the outside only. Never run a watch under a tap unless the manufacturer says that is safe.

Cleaning a Metal Bracelet

Wipe the bracelet with a dry microfiber cloth first. For more dirt, use a soft brush with a drop of mild soap and lukewarm water, and work between the links and around the clasp. Rinse with a damp cloth so no soap residue remains, then dry the bracelet thoroughly. Moisture left between links can encourage staining or corrosion over time.

If the links are stiff or the clasp is complicated, take the bracelet to a professional. It may need to come off the watch first.

Cleaning a Leather or Fabric Strap

Leather absorbs moisture, so keep it dry. Wipe the front and underside with a dry, soft cloth. Do not soak it, hold it under running water or scrub it. Let it air-dry at room temperature, and avoid heat from hair dryers or radiators, which can dry and crack the leather. Check the manufacturer’s guidance before using any leather conditioner.

Cleaning a Rubber or Resin Strap

Rubber and resin straps tolerate mild soap better than leather. Use a soft cloth with a little mild soap, work around the holes and buckle with a soft brush, then rinse and dry. Avoid harsh solvents, which can damage the material.

Cleaning the Case and Crystal

Wipe the case and crystal with a microfiber cloth. For a stubborn speck on the case, a toothpick wrapped in the edge of a cloth can help, but use only very gentle pressure. Soft metals such as gold can scratch, so if you are unsure, skip the toothpick and ask for help. Pay attention to the bezel edge, the crystal edge and the seam where the case back meets the case, because dirt collects there.

What to Avoid

  • Harsh household cleaners. Bleach, ammonia and similar products can damage seals, coatings and finishes.
  • Acetone and nail polish remover. These can damage plastics, resins and coatings.
  • Vinegar and other acidic cleaners. These can dull some finishes and damage some materials.
  • Toothpaste and baking soda. Both are abrasive and can leave fine scratches.
  • Rough brushes and scouring pads. Use soft bristles only.
  • Alcohol on straps and coatings. Many people avoid it, and it can affect some materials. Check the manufacturer’s advice.
  • Ultrasonic cleaners for a whole watch. These can damage seals and internal parts.
  • Compressed air aimed at the case. It can push debris and moisture into openings.

What About Watch Cleaning Kits?

Watch cleaning kits usually bundle a foam or gel, a brush, some cloths and sometimes a small tool. They can be convenient, but they are not necessary. A microfiber cloth, a soft brush and mild soap cover most needs. If you buy a kit, read the instructions and check that it suits your watch’s materials.

The Inside of the Watch Is Not a DIY Job

Cleaning the inside of a watch is professional work. Movement cleaning uses specialised solutions and equipment, and opening the case can affect the seals and water resistance. Solvents used in movement work are flammable and need proper ventilation, so they are not for home use. If the inside looks dirty, have a watchmaker look at it rather than wiping it out yourself.

For more on the process, see the movement cleaning article.

How Often to Clean

A watch worn every day benefits from a quick wipe every few days and a deeper clean now and then. Clean it sooner if you notice sweat, oils or dirt. Take it off before washing your hands or swimming, and dry it afterwards.

When Cleaning Is Not Enough

Stop and get a professional if you see:

For scratches, see how to polish scratches out of a watch case. If you own a Casio, the Casio restoration guide covers cleaning as part of a full restoration. For how often a mechanical watch needs a professional service, see the service interval guide.

The complete guide to repair and restoration

Watch Restoration for Beginners: Tools and First Projects
Read the guide

Keep exploring

Guides from other topics

All topics →