Repair and Restoration

Converting a Mechanical Watch to Quartz: Pros and Cons

Thinking of swapping a mechanical movement for quartz? Compare accuracy, upkeep, resale value and fit before you decide, and learn the risks.

On this page
  1. What Converting Means
  2. What Quartz Technology Does in a Watch
  3. Pros of a Quartz Conversion
  4. Cons of a Quartz Conversion
  5. Pros and Cons at a Glance
  6. Are Quartz Watches Worth Any Money?
  7. What a Movement Swap Involves
  8. Alternatives to Converting
  9. Questions to Ask Before You Convert

Converting a mechanical watch to quartz means replacing its mechanical movement with a quartz one. Owners consider it for accuracy, lower upkeep, or a thinner movement. In most cases the change is permanent. Before you decide, it helps to understand what quartz does, what you gain and lose, and what the job involves.

What Converting Means

A conversion swaps the movement inside a watch case. The hands, dial and crown usually have to be matched to the new movement, and the case must accommodate it. Converting is different from replacing a failed quartz movement with an identical one, which is a repair. A conversion changes what the watch is.

What Quartz Technology Does in a Watch

What is quartz technology used for in watches? A small quartz crystal, driven by an electronic circuit, vibrates 32,768 times per second. The circuit divides that frequency down to one pulse per second. Each pulse drives a small stepper motor that moves the hands, and a battery powers the circuit.

Quartz is precise. Typical quartz movements are accurate to around 15 seconds a month, and their timekeeping does not depend on winding or on how the watch is worn in the way a mechanical movement does.

Pros of a Quartz Conversion

  • Accuracy. Quartz usually keeps time much more consistently than a mechanical movement.
  • No winding. A quartz watch never needs to be wound.
  • Less routine upkeep. Quartz movements do not need the regular oiling and servicing a mechanical movement does, though they still need battery changes and periodic checks.
  • Thinner options. Some quartz movements are slimmer, which may suit a dress watch.
  • Steady running. The battery keeps the watch going even if it sits unworn for a while.

Cons of a Quartz Conversion

  • Lost originality. A converted watch is no longer the maker’s original design. Collectors often treat this as a lasting loss of value.
  • Lower resale value. Mechanical watches often sell for more than quartz versions from the same maker, and a converted watch usually sells for less than an original.
  • Fit problems. Movement height, stem length, dial feet and hand clearance all have to match. A small mismatch can make the hands rub or the dial sit wrongly.
  • Water resistance. Opening the case and changing the movement can affect the seals. Water resistance must be retested.
  • Loss of mechanical craft. Some owners value the movement for its engineering, which a conversion removes.
  • Hard to reverse. Original parts are often lost, so the watch usually cannot go back to its mechanical state.

Pros and Cons at a Glance

Factor Mechanical Quartz after conversion
Accuracy Varies with regulation and service Typically much more consistent
Winding Hand-wind or automatic Not needed
Routine upkeep Periodic service Battery changes and checks
Collector value Often higher if original Usually lower
Originality The maker’s design Changed
Fit and seals Original Must be checked after the change
Reversibility Original state Usually difficult

Are Quartz Watches Worth Any Money?

Are quartz watches worth any money? Many are, but as a general rule quartz watches from the same maker sell for less than their mechanical equivalents, especially on the secondary market. Some quartz models hold their value well because of the brand, design or condition. A watch’s worth depends on the model and its condition, so compare recent sales of the same model before you decide.

What a Movement Swap Involves

How much to replace a quartz movement in a watch? The price depends on the movement, whether it is a generic or branded part, and the labour involved. Labour can make up a large part of the bill, especially if the case or dial needs adjusting. Get a written quote that lists the movement, the labour, and any extra work such as hand refitting or a water resistance test.

How do you replace the movement in a quartz watch? The basic steps are:

  1. Remove the strap or bracelet, then open the caseback.
  2. Remove the hands with a proper hand puller. The guide to removing and refitting watch hands covers the method.
  3. Remove the dial, noting how it sits on the movement.
  4. Release the movement from the case.
  5. Check the crown stem and the dial feet, then fit the new movement so both line up.
  6. Refit the dial and hands, set the time, and test the watch.
  7. Check the seals and, if the watch is water resistant, have it pressure tested.

Most owners should leave a movement replacement to a watchmaker. A small error can damage the dial or the hands.

Alternatives to Converting

Before you convert, consider:

  • Servicing the mechanical movement. A service can restore accuracy and reliability. The service interval guide explains when one is due.
  • Buying a quartz watch. A quartz watch is a simpler and often cheaper way to get accurate time.
  • Keeping the watch as it is. If the watch is sentimental, a mechanical watch may suit you best even if it runs less accurately.

Questions to Ask Before You Convert

  • Is the watch valuable, vintage or sentimental?
  • Can you find a quartz movement that fits the case, the dial and the stem?
  • Will the dial and hands still line up after the swap?
  • Can the seals and water resistance be checked afterwards?
  • Are you prepared for a change that is hard to reverse?

If your answers suggest the watch matters to you as a mechanical piece, a professional service of the original movement is usually the better route. The beginner restoration guide explains where home work ends and professional work begins.

The complete guide to repair and restoration

Watch Restoration for Beginners: Tools and First Projects
Read the guide

Keep exploring

Guides from other topics

All topics →