Repair and Restoration

How to set a watch for the first time?

Set a watch the first time: identify the type, give it power, set the date away from midnight, set the time, then secure the crown and check it runs.

On this page
  1. Quick Answer: The Steps in Order
  2. Identify the Watch Type
  3. Give It Power
  4. Know the Crown Positions
  5. Set the Date Safely
  6. Set the Time
  7. Secure the Crown and Check
  8. Common First-Set Problems
  9. When to See a Watchmaker

How do you set a watch for the first time? Identify the type, give it power, pull the crown to the time-setting position, set the date away from midnight, set the time forward, then push the crown back in and secure it. The steps are much the same for most watches, but winding and date setting depend on the type.

Quick Answer: The Steps in Order

  1. Identify whether the watch is quartz, automatic or hand-wind.
  2. Give it power: wind an automatic or hand-wind watch, or check the battery in a quartz watch.
  3. Pull the crown to the time-setting position.
  4. If the watch has a date, set it away from the midnight window on mechanical watches.
  5. Set the time forward, and synchronise the seconds if you want to be precise.
  6. Push the crown in, screw it down if it is a screw-down crown, and check that the watch runs.

Identify the Watch Type

The type decides how you power the watch:

  • Quartz. Runs on a battery. Many quartz watches tick once a second.
  • Automatic. A mechanical watch that winds itself from the motion of your wrist. Its second hand usually sweeps smoothly.
  • Hand-wind. A mechanical watch wound by turning the crown. Like an automatic, its second hand often sweeps smoothly.

A smooth sweep is a clue, not proof. Some quartz watches also sweep. If you are unsure, check the manual or the brand’s guidance.

Give It Power

Automatic. An automatic that has been sitting still may need winding before it will run. Many brands suggest winding the crown by hand, often around 20 to 40 full turns, before you set the time. Check the manual for the recommended number. After that, the watch may keep running on wrist movement alone.

Hand-wind. Turn the crown gently in the winding direction until you feel firm resistance, then stop. Do not force it past that point.

Quartz. Check that a battery is fitted and undamaged. If a protective tab is fitted, remove it as the manual describes. Some watches stop the second hand while you set them, which is normal.

Know the Crown Positions

Most watches have two or three crown positions:

  • Pushed in (position 0). The watch runs normally.
  • One click out (position 1). On watches with a date or day function, this position lets you change the date. On a manual-wind watch it may be the winding position.
  • Fully pulled out (position 2). The time-setting position. Turning the crown moves the hands.

On a watch without a date, pulling the crown out once may take you straight to time-setting. Positions vary, so check the manual.

Set the Date Safely

On a mechanical watch with a date window, avoid changing the date while the hands are between roughly 9 pm and 3 am. The date-change mechanism is active during that window, and forcing a change can damage the gears. Move the hands out of that window before you adjust the date.

On many watches, a reliable method is to set the date to the day before, then advance the hands past midnight so the date changes naturally. This keeps the day and date aligned. A quartz watch is less sensitive to this, but follow the manual anyway.

Set the Time

  • Move the hands forward only. Turning them backward can stress a mechanical movement. Forward setting is a good habit on any watch.
  • Confirm AM or PM. If the watch has a day or date window, the date changes at midnight, so check which half of the day you are setting before you move the hands.
  • Synchronise the seconds if you want. Pull the crown out before the target minute, then push it in when your reference clock reaches that second. Many quartz watches stop the second hand while the crown is out, which makes this easier.

Use a reliable reference, such as a phone or a radio-controlled clock.

Secure the Crown and Check

Push the crown fully in. If it is a screw-down crown, unscrew it before you set the time, then screw it back down clockwise until it is snug. Do not overtighten it. A crown that is not fully closed can let moisture into the case.

Then check the watch. Confirm that the second hand runs and the time is correct. Wear it or keep it in a stable position, and check the time again after a day if you can. A mechanical watch may need a few hours to settle after winding.

Common First-Set Problems

  • The watch does not run. Check that an automatic or hand-wind watch is fully wound, that the crown is pushed in, or that a quartz battery is making contact.
  • The date changes at the wrong time. Check whether you set the hands through the midnight window. Move the hands outside that window and reset the date.
  • The hands stick or the crown feels stiff. Stop, and do not force the crown. A stiff or gritty crown can be a sign of a problem that a watchmaker should check.
  • The time drifts. A new or recently serviced mechanical watch may gain or lose time while it settles. If the drift continues, it may need a service or regulation.

When to See a Watchmaker

Take the watch to a professional if it does not start after winding, if the crown feels rough or loose, if you see moisture under the crystal, or if it keeps poor time after it has settled. For the wider picture, see how often a mechanical watch should be serviced. If you plan to work on watches at home, the watch restoration for beginners guide explains which jobs suit a first attempt.

The complete guide to repair and restoration

Watch Restoration for Beginners: Tools and First Projects
Read the guide

Keep exploring

Guides from other topics

All topics →