Repair and Restoration

How Often Should a Mechanical Watch Be Serviced?

Many brands suggest a service every 3 to 8 years, but wear and symptoms matter more than the calendar. Here are the signs a service is due.

On this page
  1. What a Full Service Includes
  2. How Often Brands Suggest
  3. What Changes the Interval
  4. Signs a Service Is Due
  5. Why Waiting Can Cost More
  6. Service, Clean, or Water-Resistance Test?
  7. Can You Skip a Service?
  8. Costs Vary
  9. Questions to Ask a Watchmaker
  10. Habits That Help Between Services

Many brands suggest a full service every few years, often within a range of about 3 to 8 years. Daily wear, exposure to moisture and dust, and the watch’s condition all change the right timing. Symptoms matter more than the calendar. If a watch runs poorly, stops or shows moisture, have it checked sooner.

What a Full Service Includes

A full service is a complete overhaul of the movement. A watchmaker typically:

  • opens the case and removes the movement, checking for damage
  • disassembles the movement and inspects each part for wear
  • cleans the parts in a controlled process
  • lubricates key points with the specified oils
  • reassembles the movement and adjusts its timing
  • checks and replaces worn gaskets and seals
  • pressure tests the case if the watch is water resistant
  • polishes the case and bracelet, if you ask for it

Parts that have worn are replaced when needed. These often include gaskets and the mainspring, and in some cases the crown or crystal.

How Often Brands Suggest

Manufacturers give ranges, and those ranges vary by brand and model:

  • Many brands suggest a full service every few years, often within a range of about 3 to 8 years.
  • Some modern movements, made with synthetic lubricants and newer materials, have longer recommended intervals. Check the guidance for your model rather than assuming.
  • Watches worn every day generally need attention sooner than watches worn occasionally.

Treat any figure as a starting point. The manufacturer’s guidance and the watch’s condition matter more.

What Changes the Interval

Several factors shift the right time for a service:

  • How often you wear it. Daily wear means more friction and more wear on the lubricant.
  • Exposure to moisture, dust and heat. Water, sweat and grime can speed up wear and seal failure.
  • Magnetism and shocks. Magnetism can affect accuracy, and hard knocks can damage parts.
  • Age of the lubricant. Oil dries and thickens over time, even when the watch is not worn.
  • Quality of the last service. A poor service may need redoing sooner.

Signs a Service Is Due

Instead of relying only on a calendar, watch for these signs:

  • Timekeeping drift. The watch gains or loses more time than it used to.
  • A shorter power reserve. The watch stops overnight or runs out well before its rated reserve.
  • A stiff or gritty crown. Winding or setting feels rough, loose or resistant.
  • Moisture or fog. Condensation under the crystal needs immediate attention to prevent rust and damage.
  • Noise or dirt. A rattle from the rotor, or visible debris inside an exhibition caseback, can point to a problem.
  • Stopping. A watch that stops regularly needs checking.

If you see moisture under the crystal, do not wait. Take the watch to a watchmaker as soon as you can.

Why Waiting Can Cost More

Dried or degraded lubricant increases friction, and friction wears parts. Dirt in the movement can cause the same problem. Delaying a service can turn a routine job into a larger repair, with more parts needing replacement. Moisture that gets past a failed seal can cause corrosion, and corrosion is hard to undo.

Service, Clean, or Water-Resistance Test?

These terms are often mixed up:

  • Clean. Removes dirt from the outside, or from the case and bracelet. Owners can usually do this safely.
  • Service. Opens the movement to clean, lubricate, adjust and replace worn parts. This is professional work.
  • Water-resistance test. Checks that the case still seals against pressure. It confirms the rating after the case has been opened or the seals replaced.

A service often includes a water-resistance test, but ask for it specifically.

Can You Skip a Service?

Some owners keep a watch running well for a long time without a formal service. If a watch keeps accurate time, winds smoothly and holds its power reserve, a calendar-based service may not be urgent. The trade-off is that problems can grow out of sight. Moisture, dirt and dried oil often cause damage before you notice a fault. For a valuable or important watch, a regular check is usually a sensible choice.

Costs Vary

Service prices depend on the brand, the movement, the level of work and the region. Ask for a written quote that lists what is included, such as parts, polishing and a water-resistance test.

Questions to Ask a Watchmaker

  • What does the service include, and what does it not include?
  • Which parts are replaced as standard, and which only if worn?
  • Is the watch timed and tested after reassembly?
  • Is a water-resistance test included, and is it a pressure test?
  • How long will it take, and what warranty applies?

Habits That Help Between Services

  • Keep the crown screwed down on screw-down models, and check the seals after water exposure.
  • Keep strong magnets away from the watch.
  • Take the watch off for heavy physical work or sports that risk impact.
  • Wind a hand-wind watch gently, and stop at resistance.
  • Clean the outside regularly with a soft cloth, following the cleaning guide.

After a service, check the watch’s rate over a few days. The timegrapher guide explains how timing machines measure this. For the first steps with a new or recently serviced watch, see how to set a watch for the first time.

The complete guide to repair and restoration

Watch Restoration for Beginners: Tools and First Projects
Read the guide

Keep exploring

Guides from other topics

All topics →