Quick Answer
Lug width is the distance, in millimeters, between the two lugs where the strap attaches. The strap you buy should match this number. A watch with 20 mm lugs needs a 20 mm strap.
What Lug Width Measures
The lugs are the two projections on either side of the case. The spring bar sits between them, and the strap’s end fits in the gap. Lug width is measured across that gap, from the inside edge of one lug to the inside edge of the other.
Lug width is not:
- Case size. A 41 mm watch and a 36 mm watch can share the same lug width.
- Lug-to-lug. This is the distance from the tip of the top lug to the tip of the bottom lug. It affects how the watch sits on the wrist, not the strap width.
Four Ways to Measure
1. Check the Manufacturer’s Specs
Search the brand and model number with the words “lug width.” Many brands list the figure on their product or support pages. This is the easiest method when the information is available.
2. Look at the Old Strap
Many leather and rubber straps print the width on the underside. This is a useful clue, but check it against a measurement if you can, since not every strap prints the size you need.
3. Use a Metric Ruler
- Remove the strap, so the lugs are clear.
- Measure the gap between the lugs, from inside edge to inside edge, at the spring bar.
- Read the measurement in millimeters.
- Measure again to confirm the number. A small error can matter.
4. Use Digital Calipers
Calipers are the most accurate option. Place the jaws inside the lugs, close them gently until they touch, and read the display in millimeters. They’re especially useful for a precise measurement on higher-end watches.
Common Sizes
Common lug widths include 18, 20, and 22 mm. Some watches use 16, 19, 21, or 24 mm. Many dress watches are on the smaller side, and many sports and dive watches are larger, but there are plenty of exceptions. Measure rather than guess.
Taper: The Strap Narrows Toward the Buckle
Many straps are narrower at the buckle than at the lugs. A 20 mm strap, for example, may taper to 18 mm at the buckle. Taper is often a couple of millimeters, but it varies between straps.
Taper affects how the strap looks and feels. It doesn’t change the lug measurement, so you still match the strap to the lugs.
Before You Buy
- Measure twice, or use two methods if you can.
- Check whether the listed width is the lug-end width or the buckle width. Product listings don’t always make this clear.
- Check the return policy, in case the fit is off.
- If you’re replacing the spring bars too, use bars of the length that matches the lug width.
Next Steps
Once you have the lug width, you can choose the type of strap. How to fit a NATO strap covers one type, and quick-release spring bars covers another. How should a watch fit explains how the watch itself should sit on the wrist.