Movements

How a Mechanical Watch Works: The Simplest Movement, Part by Part

Follow the energy from the mainspring through the gears, escapement and balance wheel to the hands in a simple hand-wound mechanical watch movement.

On this page
  1. Start with the mainspring
  2. The gear train carries the energy
  3. The escapement releases energy in steps
  4. The balance wheel and hairspring set the rate
  5. From the wheels to the hands
  6. Setting the time
  7. How this compares with an automatic movement
  8. Frequently asked questions

A mechanical watch movement is a small machine that stores energy in a spring and releases it at a controlled rate. The simplest version is a hand-wound movement with no date, calendar or automatic winding. It has four core parts: the mainspring, the gear train, the escapement, and the balance wheel with its hairspring. The hands are driven by the same gears. This article follows the energy from the crown to the hands.

Start with the mainspring

The mainspring is a long strip of hardened steel coiled inside a drum called the barrel. Turning the crown winds the mainspring tighter. A ratchet in the winding train stops it from unwinding backwards, so the spring holds its tension between winds.

As the mainspring unwinds, it turns the barrel and feeds energy into the gear train. The length of time a fully wound watch keeps running is called its power reserve. In a simple hand-wound watch it is often around a day or two, which is why many owners wind their watch every day. Power reserve on a watch covers the subject in more depth.

The gear train carries the energy

The barrel drives a series of wheels and pinions, known as the gear train. Each step pairs a small gear (the pinion) with a larger wheel. The train transmits force from the barrel to the escape wheel, which is the last wheel in the train.

Each pair of gears changes the speed. The wheel closest to the escapement turns fastest, and the wheels that move the hands turn much more slowly. Without this step-down, the watch would not show the time correctly.

The escapement releases energy in steps

Left alone, the gear train would run freely and the mainspring would unwind in minutes. The escapement stops that. It lets the train advance in small, regular steps.

Most wristwatches use a lever escapement. Its key parts are:

  • The escape wheel, the last wheel in the gear train, with pointed teeth.
  • The pallet fork, a lever with two small jewels, called pallet stones, that the escape wheel’s teeth rest against.
  • The impulse jewel, a small jewel on the balance wheel that pushes the pallet fork at each swing.

At each swing of the balance wheel, the impulse jewel moves the pallet fork. That lets the escape wheel advance by one tooth, and the mainspring’s energy is passed to the balance to keep it swinging. The small click each time the escape wheel steps forward is the ticking sound you hear when you hold a mechanical watch to your ear. One tick corresponds to one swing of the balance.

The balance wheel and hairspring set the rate

The balance wheel is a weighted wheel that swings back and forth. A hairspring, which is a very fine coiled spring attached to the balance, pulls the balance back toward its centre after each swing. The balance and hairspring together set how often the balance swings, much as a pendulum sets the pace of a clock.

Many movements swing at 21,600, 28,800 or 36,000 vibrations per hour. A higher rate divides time into finer steps and makes the seconds hand look smoother, but it does not by itself make a watch more accurate.

Watchmakers regulate a watch by adjusting the effective length of the hairspring. This speeds the watch up or slows it down. Owners rarely do this themselves. It is a job for a watchmaker during service.

From the wheels to the hands

The gear train has two jobs. It drives the escapement, and it moves the hands through a separate set of gears.

The minute hand is carried on a pinion that turns once per hour. A further pair of gears, the hour wheel, reduces that speed so that the hour hand turns once every 12 hours. A seconds hand, where a watch has one, sits on a faster wheel in the train.

Setting the time

A watch has two crown positions. In the normal position, turning the crown winds the mainspring. When the crown is pulled out to the setting position, a lever disconnects the winding and connects the hand-setting gears, so turning the crown moves the hands without winding the spring.

Many watches with a date advise against changing the date between about 9 p.m. and 3 a.m., while the date mechanism is most likely to be engaged. If your watch has a date, check the manufacturer’s advice before setting it.

How this compares with an automatic movement

An automatic movement follows the same energy path. It adds a rotor, a weighted piece that winds the mainspring as the wrist moves, and a set of winding gears. How automatic watches work explains that addition. The hand-wound movement is simpler, with fewer parts to see and service, which is why it is often used to learn the basics. A short explanation of what a mechanical watch is gives the wider context.

Frequently asked questions

What is the difference between a movement and a calibre?

The movement is the working mechanism inside a watch. A calibre is a specific movement design, usually identified by a name or number from its maker. Two watches from different brands can use the same calibre.

Can you see how a mechanical watch works?

Yes, in skeleton watches, where the dial is cut away or the movement is visible through a transparent case back. Some hand-wound models show the mainspring and balance wheel this way.

Do all mechanical watches have a balance wheel?

Almost all mechanical wristwatches use a balance wheel and hairspring to regulate timekeeping. The balance wheel is the part that sets the watch’s rate.

The complete guide to movements

Watch Movements Explained: Mechanical, Automatic and Quartz
Read the guide

Keep exploring

Guides from other topics

All topics →