An automatic watch is a mechanical watch that winds its own mainspring. A weighted rotor swings as the wrist moves, and gears carry that motion to the spring. The spring then powers the same gears, escapement and balance wheel as any other mechanical movement. No battery is involved.
The rotor and the winding system
The rotor is a semi-circular weight that pivots at the centre of the movement. It is usually mounted on bearings so it can swing freely, which is why some rotor noise is normal. Each movement of the wrist makes it swing, and the swing is passed through a set of reduction gears, called the winding train.
The reduction gears do an important job. A rotor moves quickly and with little force, while the mainspring needs slow, steady turning to wind. The winding train slows and strengthens the motion so that the barrel, which holds the spring, turns a little at a time.
Winding in both directions
Most modern automatics wind in both directions. Whether the rotor turns clockwise or anticlockwise, a reversing mechanism makes sure the mainspring is wound. This means a small wrist movement can add energy whichever way the wrist turns, which is why many watches are described as bidirectional winding.
Many automatic movements also include a slipping clutch or similar safeguard. This stops the spring from being overwound by a rotor that keeps spinning. The details differ between movements, so check the manufacturer’s information for your model if you need them.
From stored energy to the hands
Once the mainspring has been wound, the rest of the watch works in the same way as a hand-wound movement. The spring releases its energy through the gear train, the escapement lets the train advance in small steps, and the balance wheel sets the rate. The hands are driven from the gear train. How a mechanical watch works walks through this path in detail.
Why there is no battery
A battery is needed only when a watch must generate its own electrical signal. An automatic watch does not use one. Its energy comes from the wearer’s wrist, which winds the mainspring through the rotor. The energy is stored in the spring and released gradually.
That is why an automatic is often described as a self-winding watch. It is a mechanical watch whose power comes from movement rather than a battery. What is a mechanical watch explains the basics of the mechanical design.
Power reserve and what happens when unworn
The power reserve is the time an automatic keeps running after it has been fully wound. For many standard automatics it is roughly 35 to 45 hours. Newer designs often reach 70 to 80 hours or more. Power reserve on a watch covers how to read the figure.
If an automatic is left unworn for longer than its power reserve, it stops. This is normal and does not mean the watch is broken. Restarting it is covered in what happens if an automatic watch dies.
Keeping an automatic running
- Wear it regularly. Daily wear keeps the spring topped up.
- Use a winder if you own several. A winder turns the watch on a schedule while it is not being worn. Check its settings against the manufacturer’s advice.
- Wind it by hand when needed. Most automatics can be wound through the crown, and this is a quick way to restart a stopped watch.
Accuracy
Automatic watches are less accurate than quartz watches. A typical automatic can vary by a few seconds per day, and a poorly regulated watch can vary by much more. Accuracy depends on the movement, its regulation, its position on the wrist, and how well it has been serviced. A watch certified as a chronometer must meet the COSC standard of -4 to +6 seconds per day during testing.
Service and lifespan
Because there is no battery, an automatic has no cell to replace. Its lubricants do wear, though, and the movement needs cleaning and oiling every few years. Service intervals vary by brand and movement, so check the manufacturer’s advice. With regular service, an automatic can last for decades.
The ETA 2824 shows how a common automatic movement is built and why it is so widely serviced.
Frequently asked questions
Do automatic watches require a battery?
No. A standard automatic is powered by its mainspring, which the rotor winds from wrist movement. It has no battery to replace.
Why is my automatic watch running slow?
The most common causes are low power, old lubricant, or a need for regulation. Try winding it fully by hand and wearing it for a day. If it still runs slow or erratically, take it to a watchmaker.
Are automatic watches more accurate than quartz?
No. Quartz watches are generally more accurate. Automatics are valued for their mechanical design and the craftsmanship that goes into the movement, not for their precision.