Troubleshooting

How do I stop my watch from losing time?

You can't make a mechanical watch perfectly accurate, but you can cut big errors. Learn the fixes for quartz and mechanical watches and when to see a watchmaker.

On this page
  1. Short Answer: You Can Reduce Big Errors, Not Remove Small Ones
  2. Find Out What Kind of Watch You Have
  3. Fixing a Quartz Watch That Loses Time
  4. Keeping a Mechanical Watch Accurate
  5. Regulation Is a Watchmaker’s Job
  6. Measure Before You Change Anything
  7. What’s Normal
  8. Frequently Asked Questions

Short Answer: You Can Reduce Big Errors, Not Remove Small Ones

A mechanical watch can’t be made perfectly accurate. Its rate changes a little with power, temperature and position. What you can do is cut the large errors caused by a weak battery, a low power reserve, magnetism or a fault. Once those are fixed, a watch that a watchmaker has regulated should keep reasonable time.

Find Out What Kind of Watch You Have

The fix depends on the power source:

  • Quartz watches usually need a battery check first.
  • Mechanical and automatic watches need enough power, a clean and oiled movement and freedom from magnetism. Regulation by a watchmaker is often needed for fine accuracy.

Why do watches lose time? explains the causes for each type.

Fixing a Quartz Watch That Loses Time

  1. Check the battery. A weak battery can make a quartz watch fall behind. A second hand that jumps every two seconds is a clear warning sign.
  2. Replace the battery with a matched cell if you’re comfortable doing so. Match the code printed on the old one.
  3. Check the seals. If the watch is water-resistant, have them checked after the battery change.
  4. Keep it away from magnets. A strong magnet can disturb the movement.
  5. If the error persists, take it to a watchmaker. Quartz watch problems covers the common faults.

Keeping a Mechanical Watch Accurate

  • Keep it wound and worn. An automatic that runs down can lose rate as its power drops. Wear it regularly, or wind it by hand before wearing it after a break.
  • Keep it away from magnets. Speakers, magnetic clasps and chargers can magnetize the hairspring, which usually makes the watch run fast. A magnetized watch explains how to test for it.
  • Avoid knocks. A hard knock can disturb the balance or the jewels. If the watch has been dropped, check it. My watch stopped after a drop covers what to look for.
  • Keep it serviced. Dried or thickened lubricants increase friction. A service cleans and lubricates the movement and checks its condition.

Regulation Is a Watchmaker’s Job

Regulation adjusts a watch’s rate by changing parts such as the balance or hairspring. It needs a timing machine, the right tools and experience with very fine parts. Don’t try to regulate a watch at home, because a small mistake can damage the movement.

A watchmaker can measure the rate and amplitude in several positions and adjust the watch to keep it within a sensible range.

Measure Before You Change Anything

Find out how much the watch loses or gains before you act. Note the error against a reliable time source over several days, and record the position of the watch. Why your watch is losing or gaining time explains how to do this.

What’s Normal

  • A standard quartz watch is typically rated to about 15 seconds per month.
  • A mechanical watch varies more. A small daily error is normal, and it changes with power, temperature and position.
  • A large or sudden change is worth investigating, whatever the watch type.

Frequently Asked Questions

Should I wear my automatic watch more to keep it accurate? Regular wear helps keep the power up, so the rate can stay steadier. Wearing it more won’t fix a fault, though.

Does setting the time fix the error? No. Setting the time changes the hands, not the rate. The rate depends on the movement.

Does a winder help? A winder keeps an automatic wound when you’re not wearing it, which can help the rate stay steadier. It doesn’t fix a fault. Why automatic watches stop when not worn covers the basics of winding and power reserve.

The complete guide to troubleshooting

Why Your Watch Keeps Stopping (and How to Fix It)
Read the guide

Keep exploring

Guides from other topics

All topics →