Short Answer: It Depends on the Movement
Watches lose time for different reasons depending on how they’re powered. A quartz watch usually loses time because of its battery or temperature. A mechanical or automatic watch loses time because of changes in its power, its lubricants, its temperature, its position or a knock.
Why Quartz Watches Lose Time
- A weak battery. A battery that’s running low can supply too little power to the quartz crystal. The watch can fall behind, or the second hand can skip.
- Temperature. A quartz crystal’s rate changes a little with temperature. Better quartz movements compensate for this, so a large or sudden change usually has another cause.
- Moisture or dirt. Moisture or dirt in the circuit or on the contacts can cause intermittent problems.
If a quartz watch loses a large amount of time, check the battery first. Quartz watch problems covers the common faults.
Why Mechanical and Automatic Watches Lose Time
- Low power. A mechanical watch’s rate depends on the mainspring delivering steady energy. When the watch is under-wound, the rate can drop. This is common with automatic watches that aren’t worn regularly.
- Dried or thickened lubricants. The oils inside a watch change over time. Increased friction can slow the watch or make it run unevenly.
- Temperature. Metal parts, including the hairspring, expand and contract with temperature, which affects the rate.
- Position. Gravity acts on the balance wheel differently when the watch is lying flat, standing on its side or on the wrist. This makes the rate vary slightly with position.
- Shock. A hard knock can move parts in the movement or disturb the balance.
Magnetism Usually Makes a Mechanical Watch Run Fast
Magnetism is often listed as a cause of time loss, but it usually makes a mechanical watch run fast. A magnetized hairspring has coils that stick together, which changes how it works. Strong magnetism can also disturb the running in other ways, so a magnetized watch may behave erratically. A magnetized watch that runs fast covers how to test for it and demagnetize it.
How Much Error Is Normal
Accuracy depends on the type of watch:
- Standard quartz watches are typically rated to about 15 seconds per month.
- COSC-certified chronometers must meet a tighter test standard, within -4 to +6 seconds per day in testing.
- Mechanical watches vary more. A small daily variation is normal, and it can change with power, temperature and position.
A watch that loses or gains far more than these figures suggest may need a battery change, a wind or a service. Why your watch is losing or gaining time explains how to measure the error over several days.
When to See a Watchmaker
- The error changed suddenly.
- The watch still loses or gains time after a new battery or a proper wind.
- The watch was dropped or knocked.
- The watch hasn’t been serviced for several years.
Ask for the timing results before and after the work so you can see what changed.