Movements

What is a mechanical watch?

A mechanical watch keeps time with a wound mainspring, gears and a balance wheel, not a battery. See how it works and how it differs from quartz.

On this page
  1. How a mechanical watch keeps time
  2. The main parts of a movement
  3. Manual-wind and automatic watches
  4. How a mechanical watch differs from quartz
  5. How accurate is a mechanical watch?
  6. Caring for a mechanical watch
  7. Frequently asked questions

A mechanical watch is a timepiece that keeps time with a clockwork movement. Its power comes from a coiled spring, called the mainspring, which is wound by hand or by the wearer’s wrist. The mainspring then releases that energy slowly through a set of gears. No battery or electronic circuit is involved.

How a mechanical watch keeps time

The energy follows a fixed path:

  1. The mainspring stores energy when it is wound.
  2. The gear train carries that energy from the mainspring to the rest of the movement and on to the hands.
  3. The escapement lets the gear train advance in small, regular steps instead of letting it run freely.
  4. The balance wheel, controlled by a fine hairspring, swings back and forth at a steady rate. Each swing marks off a short, fixed slice of time.

The balance wheel and escapement work together. Each swing lets the escapement release one small step of energy. That release is the ticking people hear when they hold a mechanical watch to their ear. Many movements swing at 21,600, 28,800 or 36,000 vibrations per hour, which is 3, 4 or 5 hertz.

For a full, part-by-part walkthrough, see how a mechanical watch works.

The main parts of a movement

Beyond the four parts above, a typical movement includes:

  • Jewels: small synthetic gemstone bearings that reduce friction where the wheels pivot. How many jewels a watch movement needs explains what the number does and does not tell you.
  • Plates and bridges: the metal framework that holds the wheels in place.
  • Dial and hands: the gear train turns the hands over the dial, so the hands show the time the movement has counted.

Manual-wind and automatic watches

Both types are mechanical. The difference is how the mainspring gets wound.

  • Manual-wind watches are wound by turning the crown. Most people wind them once a day, though the schedule depends on the power reserve.
  • Automatic, or self-winding, watches have a rotor: a weighted piece that pivots as the wrist moves and winds the mainspring. How automatic watches work covers the rotor in detail, and manual wind vs automatic watches compares the two in everyday use.

How a mechanical watch differs from quartz

A quartz watch runs on a battery. The battery drives a small quartz crystal that vibrates 32,768 times per second, and electronics divide that signal down to one pulse per second to move the hands. A quartz watch has no mainspring and no balance wheel.

The practical differences are:

  • Power: a mechanical watch must be wound, either by hand or by wrist movement. A quartz watch needs a battery replaced every few years.
  • Accuracy: a typical quartz watch keeps time to within about 15 seconds per month. A mechanical watch usually varies by a few seconds a day.
  • Servicing: a mechanical watch needs periodic professional servicing. A battery change on a quartz watch is simpler, although the movement still needs care.

Watch movements explained sets the three main movement types side by side.

How accurate is a mechanical watch?

Accuracy depends on the quality of the movement, how well it has been regulated, its position, the temperature, and how long it has been since the last service.

The Swiss COSC (Contrôle Officiel Suisse des Chronomètres) tests movements and certifies those that meet chronometer standards. A certified movement has to fall between -4 and +6 seconds per day during testing. Not every mechanical watch is certified, so a watch without a certificate may vary more.

Caring for a mechanical watch

  • Wind by hand carefully. Wind a manual-wind watch regularly, and stop when the crown feels stiff.
  • Keep it away from strong magnets. Magnetism can affect the balance spring and the accuracy of the watch.
  • Avoid sharp knocks and sudden temperature changes.
  • Keep it dry. Check the water resistance rating, and have the seals checked at each service.
  • Have it serviced. Service intervals vary by brand and movement, often several years apart. Check the manufacturer’s advice. Opening the case and working inside the movement is work for a watchmaker.

Frequently asked questions

Does an automatic watch need a battery?

No. A standard automatic watch is powered by its mainspring, which the rotor winds using wrist movement. It has no battery. If the watch is not worn for long enough, the mainspring unwinds and the watch stops, but it can be wound again by hand or by wearing it.

Is a mechanical watch better than quartz?

It depends on what you value. Quartz watches are more accurate and need less day-to-day attention. Mechanical watches are valued for their craftsmanship and for the movement you can see through an exhibition case back. Neither is better for every buyer.

How long does a mechanical watch last?

With regular servicing, many mechanical watches can run for decades. Vintage examples that have been looked after properly are still in use today. Service history and storage conditions make a large difference.

The complete guide to movements

Watch Movements Explained: Mechanical, Automatic and Quartz
Read the guide

Keep exploring

Guides from other topics

All topics →