When an automatic watch runs out of power, its mainspring has unwound and the watch stops. This is normal and does not usually mean the watch is broken. To restart it, wind the crown gently by hand, or wear the watch so the rotor can wind the spring. Then set the time and date again.
Why an automatic watch stops
An automatic watch has no battery. Its energy comes from the mainspring, which the rotor winds as the wrist moves. While the watch is worn, the rotor keeps the spring topped up. When the watch is left unworn, the mainspring slowly unwinds.
How long the watch keeps running after it is fully wound is set by its power reserve. Many automatic movements hold roughly 38 to 48 hours, and some newer designs hold 70 to 80 hours or more. A watch that is left off for longer than its reserve will stop. Power reserve on a watch explains how to read that figure.
Does stopping damage the watch?
Generally not. Letting the mainspring run down is not considered harmful to the movement in itself. The main downside is the inconvenience of setting the time and date again.
A watch that stops often, or that does not restart after winding, should be checked by a watchmaker. The cause may be simple, such as lubricant that has thickened, or it may be a fault that needs repair.
How to restart it
- Wind it by hand. Turn the crown gently clockwise, about 20 to 40 turns. Stop if the crown feels stiff.
- Give it motion. Wear the watch, or shake it gently. The rotor will wind the spring as you move.
- Set the time and date. Pull the crown out to the setting position and set the hands. Many watches with a date advise against changing the date between about 9 p.m. and 3 a.m., while the date mechanism is most likely to be engaged.
If you find yourself winding the watch every morning, wear it more often, or use a watch winder. A winder turns the watch on a schedule to keep it running when it is not being worn. Check the winder’s settings against the manufacturer’s advice.
When to see a watchmaker
Take the watch to a watchmaker if:
- It does not start after a full hand-wind and a few hours of wear.
- It starts but runs very erratically, or loses or gains time sharply.
- You see moisture or condensation under the crystal. Water inside the case can damage the movement, so it should be dealt with quickly.
- The crown feels loose or stiff, or does not wind the watch.
Opening the case to look inside is work for a watchmaker, not a home task.
Preventing unexpected stops
- Wear it regularly, or keep it on a winder if you rotate between several watches.
- Check the power reserve when choosing a watch. A longer reserve gives you more time before it stops.
- Keep up with servicing. Service intervals vary by brand and movement, often several years apart. Follow the manufacturer’s advice.
Frequently asked questions
Do automatic watches require a battery?
No. A standard automatic watch runs on its mainspring. The rotor winds the spring from wrist movement, so no battery is needed. How automatic watches work explains the rotor system in more detail.
How long will an automatic watch last?
With regular servicing, many automatic watches can run for decades. Service intervals are usually several years apart, so ask a watchmaker for guidance on your model.
What is the downside of an automatic watch?
An automatic watch needs to be worn or wound to keep running. The rotor can also make the case a little thicker than a hand-wound watch. Servicing can cost more, because the movement has more parts.