Movements

ETA 2824: Why This Workhorse Automatic Movement Is So Common

The ETA 2824 is a Swiss automatic movement with a date, released in 1971. See its key specs, why brands use it, and what to check before buying.

On this page
  1. Key specifications
  2. Why so many brands use it
  3. Clones and alternatives
  4. Accuracy and regulation
  5. Servicing and common wear points
  6. Setting the date
  7. Buying a watch with a 2824
  8. Frequently asked questions

The ETA 2824 is one of the most widely used automatic movements in watchmaking. It is a self-winding movement with a date, released in 1971, and it beats at 28,800 vibrations per hour. Its design is simple and sturdy, which helped it spread across many brands and survive the quartz era. Its popularity also means parts and experienced watchmakers are easy to find.

Key specifications

The specifications below describe the modern version. Earlier and later versions differ, so check the version in any particular watch.

  • Type: automatic (self-winding) with a date, and hand-winding.
  • Beat rate: 28,800 vibrations per hour, or 4 Hz.
  • Jewels: 25 in modern versions. An early 17-jewel version with a simpler regulator also existed.
  • Size: about 26 mm across (11½ lignes) and about 4.6 mm thick.
  • Shock protection: Incabloc on the balance, according to enthusiast sources.
  • Date setting: quick-set through a second crown position.

For how a movement like this fits together, see how automatic watches work. The rotor and winding train are the parts that the 2824 adds to a basic mechanical movement.

Why so many brands use it

Several factors explain why the 2824 became so common:

  • A proven design. The movement’s construction dates back to the 1950s in most details, and it was built to be reliable and cheap to make.
  • A long production run. It has been made for decades, with production figures in the millions. That means many watchmakers know it well.
  • Parts and clones. After the original patents expired, many clones appeared from makers in Switzerland and elsewhere.
  • Survival through the quartz era. When quartz watches took a large share of the market, the 2824 remained in use, which helped keep it in production.

Clones and alternatives

The best-known alternative is the Sellita SW200. Sellita designed it as a close match to the 2824 design, so many brands use one or the other. Other clones are made in the Far East.

Clone quality varies. Finishing, parts and service support differ between makers, so check who made the movement and whether a watchmaker can service it. Supply has also changed in recent years. The Swatch Group, which owns ETA, has restricted movement supplies to outside brands, and reports suggest many brands have moved to alternatives such as Sellita.

Accuracy and regulation

Well-regulated examples can meet chronometer standards. Later versions use a Glucydur balance and fine regulation, which help with stability. A movement that meets chronometer standards is not the same as a certified chronometer watch. COSC tests movements before they are cased, while Master Chronometer tests the finished watch, so check the certification on the watch itself. For what the standards involve, see the most accurate watch movements.

Servicing and common wear points

A 2824 can be serviced by most watchmakers who handle automatic movements, which is one reason for its popularity. Routine service means cleaning, lubricating and checking the movement, plus the date and winding parts.

Certain parts are known to wear over time. The crown wheel, which the winding ratchet engages, can wear if its bearing is worn. The rotor’s winding wheels can also wear. A rotor that keeps spinning freely when you wind the watch by hand, rather than decoupling, may point to worn wheels and a service that is due.

Setting the date

The date on a 2824 changes at midnight. The date is held in tension through the day and released at midnight, so quick-setting the date around that time is best avoided. Use the second crown position to set the date when it is well away from midnight, and check the manufacturer’s instructions for your watch.

Buying a watch with a 2824

When you consider a watch with a 2824 movement:

  • Ask the seller which movement the watch uses, and whether it is a genuine 2824-2 or a clone.
  • Ask for the service history.
  • Remember that the watch’s price depends on the brand, case, dial and finishing, not just the movement.

Frequently asked questions

What does the -2 in ETA 2824-2 mean?

The -2 suffix marks a revised version of the original 2824. Enthusiast sources date the revision to 1982, so older watches may have the original design.

Is the ETA 2824 the same as Sellita’s SW200?

No. The SW200 is designed as a close alternative, not the same movement. The two are often compared because they share a design basis.

Is the ETA 2824 a good choice for a first automatic?

It is widely used and well understood, which makes it a practical choice. The watch’s overall quality depends on its condition, service history and case, so judge each watch on its own merits.

The complete guide to movements

Watch Movements Explained: Mechanical, Automatic and Quartz
Read the guide

Keep exploring

Guides from other topics

All topics →