The Caliber 1575 is a Rolex movement, and it is one of many in-house calibres that Rolex has used over the years. This article looks at what the movement is, how it is built, how its accuracy should be judged, and what to consider when servicing an older example. It is an explainer, not a hands-on test.
Specifications for older Rolex calibres are scattered across sources, and figures often disagree. Check any number you read, including the ones here, against a Rolex service document or a qualified watchmaker before relying on it.
What the Caliber 1575 is
Rolex makes most of its own movements in-house, and the 1575 is one of them. It is generally described as a self-winding movement with a date display. Rolex’s self-winding system, the Perpetual rotor, dates back to 1931, when the company introduced its first Oyster Perpetual.
If you are new to the terms, what a mechanical watch is explains the basic parts that every movement of this type shares.
Design: how the movement is built
Like most Swiss mechanical watches, the 1575 has a mainspring, a gear train, a lever escapement, and a balance wheel with a hairspring. A rotor winds the mainspring as the wrist moves. Dial, hands and date are driven from the gear train.
For how that system works in general, see how automatic watches work. The 1575 follows the same principles, and the design details that matter most to a buyer are the quality of the finish and whether the parts are original.
Accuracy: what to expect
Accuracy depends on the movement’s condition, its regulation, the position it is worn in, and the time since its last service. Two standards are often quoted for modern watches:
- COSC chronometer certification requires a movement to fall between -4 and +6 seconds per day during testing.
- Rolex’s own standard for its current chronometers is stricter, at about plus or minus 2 seconds per day.
Older movements were not tested to these modern standards, and most have not been. Reading a published tolerance for a 1575 is not the same as proving that a particular watch meets it. Test a watch against a reliable reference over several days before deciding it is out of tolerance, and ask a watchmaker to check its rate in different positions.
For context on how accuracy is measured across different movement types, see the most accurate watch movements.
Servicing an older Rolex movement
Servicing is where the 1575’s long life depends. A few points matter most:
- Intervals vary. Many brands quote somewhere between five and ten years. Ask an authorised service centre for the current recommendation for the specific model.
- Parts can be hard to source. Original parts for older calibres may be scarce. Ask whether a watchmaker can source them, and how they will be fitted.
- Experience matters. Choose a watchmaker who has worked on vintage Rolex movements before, and ask for an itemised service report.
- Date mechanism. Check whether the date changes correctly, since a worn date mechanism is a common issue in automatic calendars. Avoid changing the date between about 9 p.m. and 3 a.m., while the mechanism is most likely to be engaged.
Opening the case and working on the movement is work for a qualified watchmaker, not a home task.
Before you buy a watch with a 1575
If you are considering a watch with this calibre, check the following:
- Whether the movement is the original fit for the case and dial.
- Whether the dial and hands match the reference the seller describes.
- Whether there is a service record, and when the last service took place.
- How the watch runs in its normal wear position, and whether the date changes cleanly.
Frequently asked questions
Is the 1575 a good movement?
It can be, when it is in good condition and properly serviced. Its quality depends on how well it has been maintained, so judge each watch individually.
Can a 1575 be serviced today?
Yes, by a watchmaker experienced with vintage Rolex movements. Confirm before you commit that the watchmaker can source the parts the watch needs.