Movements

How Many Jewels Does a Watch Movement Need? What the Number Means

Watch jewels are synthetic gemstone bearings that cut friction. Learn what they do, where they sit, and why a higher jewel count is not always better.

On this page
  1. What jewels do
  2. Where jewels sit in a movement
  3. Shock protection on the balance
  4. Why a higher count is not always better
  5. Jewels in automatic and complicated movements
  6. How to read a jewel count
  7. A short history of jewel bearings
  8. Frequently asked questions

There is no single correct number. A basic hand-wound movement often has around 17 jewels, and automatic or more complicated movements commonly have more. The count depends on the design. Jewels are used where metal parts would wear quickly, so the real question is whether a movement has enough of them in the right places. A higher number on its own does not tell you much about quality.

What jewels do

A watch movement is made of metal wheels that turn on tiny pivots. Each pivot turns against a metal plate or bridge, and the contact creates friction and wear. Jewels are small bearings, usually made of synthetic ruby or sapphire, that give the pivot a very hard, smooth surface to run in. They are harder than metal and hold oil well.

The need is greater than it might seem. The fourth wheel of a basic movement, for example, makes one full turn per minute, which is about 1,440 turns a day. Without jewel bearings, that much metal-on-metal contact would soon wear the movement out.

Where jewels sit in a movement

Jewels are placed where the most wear happens:

  • Escapement and balance. These parts move the most, and their jewels take the most stress. They include the pallet jewels that the escape wheel’s teeth rest on, the roller jewel that carries the impulse to the balance, and the top and bottom jewels that hold the balance staff.
  • Gear train. Fast-moving wheels run in hole jewels, which are doughnut-shaped bearings through which the pivot passes.
  • Wheels and arbors. Some wheels use flat cap jewels at the end of the arbor, which take the axial load.

The jewel types are simple: hole jewels, cap jewels, pallet jewels and the roller jewel. Each has a shape designed to hold oil in place by capillary action.

Shock protection on the balance

The balance pivots are the most fragile part of a movement. A knock can crack a pivot or push the balance staff out of place. To protect against this, many movements set the balance jewels in shock-absorbing springs. Common systems include Incabloc, Kif and Etachoc. The jewel can shift slightly under a sharp blow, then return to its position.

Why a higher count is not always better

For much of watchmaking’s history, the number of jewels was a reasonable guide to quality and complexity. Synthetic jewels are now cheap and easy to set, so the count has lost much of its meaning.

A well-designed movement with fewer friction points may need fewer jewels than a poorly designed one with more. Some brands use high jewel counts as a marketing point. A high count is a fact about the movement, not a verdict on how well it is made, so weigh it alongside the movement’s accuracy, finishing and service record.

Jewels in automatic and complicated movements

An automatic movement has more moving parts to support, including the rotor’s bearings and the winding train. These usually need extra jewels. Chronograph, date and repeater functions also add moving parts and so may add jewels. Very complicated watches can have more than 40 functional jewels.

How automatic watches work explains the rotor and winding train in more detail.

How to read a jewel count

Jewel counts are usually given in a spec sheet or on the movement. When you compare two watches:

  • Check whether the count is a functional number or includes decorative jewels, such as settings used for looks alone.
  • Compare movements of similar type. A 17-jewel hand-wound movement and a 25-jewel automatic are not doing the same job.
  • Look at the accuracy, service interval and reputation of the movement, not the count alone.

A short history of jewel bearings

Jewel bearings were introduced in the early 1700s. The English patent for the idea is usually credited to Nicolas Fatio de Duillier and the Debaufre brothers. Watchmakers used jewels to reduce wear in clocks and watches for centuries. The use of synthetic ruby and sapphire made them cheap and easy to produce, which is why they are now common in mass-produced movements.

Frequently asked questions

Does a greater number of jewels make a watch better?

Not on its own. The count reflects the design and the functions. A well-designed movement with fewer friction points can need fewer jewels and still be a better watch than one with many more.

Do all watches have jewels?

No. Some modern movements replace metal parts with materials such as silicon, which reduces the need for jewels. Jewels are still used in most mechanical movements, and their function is the same: to reduce wear where parts move.

The complete guide to movements

Watch Movements Explained: Mechanical, Automatic and Quartz
Read the guide

Keep exploring

Guides from other topics

All topics →