A watch is a small machine inside a protective case. The visible parts are the case, crystal, bezel, dial, hands, crown and pushers. Inside, a movement drives the hands. Knowing the names of these parts makes it easier to read a watch, follow a manual and describe a problem to a watchmaker.
Parts of a watch at a glance
- Case: The outer body that holds everything together.
- Lugs: The projections that hold the strap or bracelet.
- Caseback: The back of the case, which may be solid or have a window.
- Crystal: The clear cover over the dial.
- Bezel: The ring around the crystal. Some bezels turn.
- Dial: The face, with markers, numerals and any subdials.
- Hands: The pointers that show the time.
- Crown: The knob on the side, used for winding and setting.
- Pushers: Buttons on the case, usually for a chronograph.
- Movement: The mechanism inside that drives the hands.
The case, lugs and caseback
The case is the metal body of the watch. The middle section, often called the middle case, usually carries the crown and pushers. The lugs are the short projections on each side. The strap or bracelet attaches between them, so the distance between the lugs sets the strap width the watch needs.
The caseback closes the bottom. A solid caseback protects the movement. A display caseback has a window of glass or crystal, so you can see the movement from the back.
The crystal
The crystal is the clear cover over the dial. It protects the dial and hands. Crystals are usually made of sapphire, mineral glass or acrylic, and each material trades scratch resistance against impact resistance. The sapphire vs mineral crystal guide explains the differences.
The bezel
The bezel is the ring around the crystal. It holds the crystal in place, frames the dial and, on many watches, carries a scale. A rotating bezel lets you measure elapsed time. A fixed bezel is usually decorative or purely protective. The watch bezels guide covers each type.
The dial
The dial is the face of the watch. It holds the time markers, which are the numbers, indices or lines that show the hours. It may also hold:
- A date window: A small aperture that shows the day of the month.
- Subdials: Smaller dials inside the main dial that show extra information, such as a small seconds hand or a stopwatch counter.
- Printed text: The brand name, model and other details.
- Lume: Luminous material on the markers and hands, which glows in the dark.
The hands
Most watches have three hands:
- Hour hand: The short, thick hand. It tells you the hour.
- Minute hand: The long hand. It tells you the minutes.
- Seconds hand: The thin hand. It tracks seconds. Some watches have no seconds hand.
Hands come in many shapes. Dress watches often use slim or ornate hands, and sport watches usually use larger, brighter hands that are easier to read at a glance.
Center seconds vs small seconds
A center seconds hand sits on the same central axis as the hour and minute hands. It sweeps across the full diameter of the dial, so you can see the seconds counting from anywhere on the watch.
A small seconds hand sits in a subdial, most often at the 6 o’clock position. It is a separate small dial with its own hand.
Center seconds designs fall into two types. In a direct center seconds design, the movement’s gearing puts the seconds hand on the center axis. In an indirect design, extra gears or a bridge carry the seconds indication up to the middle. Indirect designs can sometimes make the hand flutter, so a friction spring is often used to steady it.
Center seconds hands are common on dress watches and are useful when you want to time something precisely. They are also a more complex design than a small seconds hand.
The crown
The crown is the knob on the side of the case. It winds the mainspring on a mechanical watch and sets the time and date. On a screw-down crown, you must unscrew the crown before you pull it out or wind the watch. Once you are finished, screw it back down. The how a watch crown works guide explains the different types.
Pushers and chronograph buttons
Pushers are the buttons on the case. On chronographs, they control the stopwatch function. Other watches may use pushers for other features, so check the manual.
A two-pusher chronograph works like this:
- Top pusher (usually at 2 o’clock): Press once to start the chronograph. Press again to stop it.
- Bottom pusher (usually at 4 o’clock): Press after stopping to reset the chronograph hands to zero.
Other types of chronograph pusher include:
- Monopusher: One button handles start, stop and reset in turn.
- Flyback: The bottom pusher resets the chronograph to zero and starts it again in one press, even while it is running. A non-flyback chronograph does nothing if you press reset while it is running.
- Split-seconds (rattrapante): An extra pusher, often at 10 o’clock, controls a second hand that can stop while the main chronograph keeps running. It is used to time two events, such as lap times.
Screw-down pushers must be unscrewed before you press them. Pressing them while still screwed down can damage them. Check the manual before using any pusher underwater, because not every watch is designed for it.
A digital or quartz watch with four buttons works differently from a mechanical chronograph. Its buttons usually control a menu, so the manual is the best guide.
Subdials, the date and the cyclops
Subdials show extra information on the dial. On a chronograph they often display minutes or hours of elapsed time. The subdials guide explains the common types.
A cyclops is a small magnifying lens over the date window. It makes the date easier to read, and the cyclops lens guide covers what it does and what it does not do.
The date window shows the day of the month. A basic date wheel has 31 positions, so the date must be corrected at the end of months with fewer days. Some watches have a more advanced calendar that adjusts for shorter months, but a basic date watch needs manual correction.
Lume
Lume is the luminous material on the hands and markers that glows in the dark. Modern watches usually use a non-radioactive luminous material, though older and some vintage watches may use other types. The watch lume guide explains the main types.
The movement
The movement is the mechanism inside the watch. It has two broad types:
- Mechanical: A mainspring stores energy, and a balance wheel controls the release of that energy. A manual-wind watch needs winding with the crown. An automatic watch winds itself as you move your wrist.
- Quartz: A battery powers a quartz crystal that vibrates at a steady rate, which drives the hands. A quartz watch needs a battery change every few years.
You do not need to know how a movement works to read the time, but it is useful to know which type you have when you care for the watch.
How to read a wrist watch
Reading an analog watch takes three steps:
- Read the hour first. Look at where the short hour hand points. If it points directly at a number, that is the hour. If it sits between two numbers, use the smaller number, because the hour hand is the number it has just passed.
- Read the minutes. Look at the long minute hand. Each number from 1 to 12 stands for five minutes, so multiply the number by 5. A hand pointing at 3 means 15 minutes, and 6 means 30 minutes. If the hand points between two numbers, count the small markers.
- Check the seconds (optional). If there is a seconds hand, read it the same way as the minute hand.
Many people find it faster to use the 12, 3, 6 and 9 positions as anchors instead of counting from 12 each time.
An analog watch does not show whether it is morning or evening. A 12-hour dial goes around twice a day, so you need to use context to tell AM from PM.
Which wrist to wear a watch on
There is no rule. The common convention is the left wrist, because the crown is on the right side of the case and is easier to reach with the right hand. Many people who are left-handed wear a watch on the right wrist. Wear it on whichever wrist you find more comfortable.
Parts at a glance
| Part | What it does | Where to read more |
|---|---|---|
| Case | Holds the movement and other parts | This guide |
| Crystal | Protects the dial | Sapphire vs mineral crystal |
| Bezel | Holds the crystal, may turn for timing | Watch bezels |
| Dial | Shows the time and other information | This guide |
| Hands | Show hours, minutes and seconds | This guide |
| Crown | Winds and sets the watch | How a watch crown works |
| Pushers | Control a chronograph | This guide |
| Subdials | Show extra information | Subdials |
| Cyclops | Magnifies the date | Cyclops lens |
| Lume | Glows in the dark | Watch lume |
Frequently asked questions
What does the flyback function do?
A flyback chronograph lets you reset the chronograph to zero and start it again with one press of the bottom pusher, even while it is running. A standard chronograph has to be stopped before it can be reset.
What is the knob on a watch?
That is the crown. It winds a mechanical watch and sets the time and date. On some watches it can also control other functions.
How does a watch know if a month has 30 or 31 days?
It usually does not. A basic date wheel shows 31 days, so you correct the date at the end of shorter months. Watches with a more advanced calendar adjust automatically for shorter months.