A subdial is a small dial inside the main face of a watch. It has its own hand or hands and a scale of its own, and it shows extra information. The most common subdials show seconds, the elapsed time on a chronograph, or the power reserve. Some show a moon phase or a second time zone.
Small seconds subdial
A small seconds subdial shows seconds in a dial of its own. It is most often placed at 6 o’clock, though other positions are used. Its hand is usually thinner than the hour and minute hands.
The small seconds subdial is common on dress watches. It keeps the center of the dial clear, so the main time reads easily. The alternative is a center seconds hand, which sits on the central axis and sweeps the whole dial. The parts of a watch guide compares the two.
Chronograph counters
On a chronograph, subdials often act as counters for the stopwatch. A typical layout has a minute counter and an hour counter, plus a running seconds hand. The positions vary from watch to watch, and 3, 6 and 9 o’clock are common.
Here is a worked example. Suppose a chronograph has a 30-minute counter at 3 o’clock and a running seconds subdial at 9 o’clock. You start the chronograph, and after 15 minutes and 20 seconds you stop it.
- The 3 o’clock counter shows 15 minutes.
- The central seconds hand shows 20 seconds.
- The 9 o’clock subdial keeps running, but it shows the time of day’s seconds, not the stopwatch.
Because the layout varies, read the scale printed on each counter before you read it. A chronograph’s start, stop and reset buttons control these counters. The parts of a watch guide explains each pusher.
Power reserve subdial
A power reserve subdial shows how much energy is left in the mainspring. It usually has a scale marked with a number of hours or days, and a hand that moves as the watch runs down. When the hand nears the end of its scale, the watch needs winding or wearing.
On an automatic watch, the power reserve shows how long the watch will run without being worn. The exact figure depends on the watch, so check the manufacturer’s stated power reserve.
Moon phase and day/night indicators
A moon phase display can appear on a subdial, although it is not always a subdial. It shows the phase of the moon as a disc or an aperture that changes over the lunar cycle. Moon phase displays need occasional adjustment, so check the manual for the interval on your watch.
A day/night indicator is often a small subdial with a 24-hour scale. It turns with the hour hand over 24 hours and shows whether it is day or night at the time shown. It is useful for telling morning from evening on a 12-hour dial.
Second time zone and GMT subdials
Some watches show a second time zone on a subdial. The subdial usually has a 24-hour scale so you can tell day from night at the second location. Other watches use a GMT hand and a rotating bezel for the same job. The watch bezels guide covers the bezel side.
How to read a subdial
Four steps help:
- Find the scale. Each subdial has its own scale. Read the numbers or marks printed on it before you read the hand.
- Find the hand. A subdial may use a thinner or differently colored hand than the main hands.
- Note the unit. A counter may show minutes, hours or seconds, and a power reserve may show hours or days.
- Check the reference. If the subdial shows a value that depends on the rest of the watch, such as a moon phase or power reserve, confirm the figure with the manual.
Do subdials change how a watch works?
A subdial is a display. It shows information from the movement, but it does not change how the watch keeps time. A watch with many subdials can still be accurate, and a watch with none can still be accurate. The subdial is a way of showing the information, not a measure of how well the watch works.
Frequently asked questions
What is a subdial on a watch?
A subdial is a smaller dial inside the main watch face. It has its own hand or hands and shows extra information, such as seconds, elapsed time, power reserve, moon phase or a second time zone.
Why does a chronograph have small dials?
The small dials are counters that track the elapsed time of the stopwatch. One counts minutes, one counts hours, and some have a running seconds hand. They keep the stopwatch time separate from the time of day.
Do subdials affect the accuracy of a watch?
No. A subdial displays information from the movement. It does not change how accurately the watch keeps time.
For the crown, pushers and other parts of the watch, see the parts of a watch. A magnified date is a different dial feature, covered in the cyclops lens guide.