Complications

How a Chronograph Works: Start, Stop, Reset and Flyback Explained

How a chronograph's start, stop and reset controls work, how the heart-shaped cam returns the hand to zero, how to read the subdials, and what flyback means.

On this page
  1. What a chronograph does
  2. The controls: start, stop and reset
  3. How the mechanism works
  4. Column wheels and cams
  5. How to read a chronograph
  6. Subdials and layouts
  7. Flyback
  8. Split seconds
  9. Scales on the dial and bezel
  10. Modular and integrated chronographs

What a chronograph does

A chronograph is a watch with a built-in stopwatch. It measures elapsed time, usually in seconds, minutes and hours, while the watch keeps showing the normal time. Starting, stopping or resetting the stopwatch does not interrupt the time display, which is why chronographs are popular with pilots, drivers, athletes and anyone who times events.

The name comes from Greek words meaning “time” and “write.” Early chronograph designs were used for timing races and recording intervals, and the basic idea has changed little since.

The controls: start, stop and reset

Most chronographs have two pushers on the side of the case:

  • Top pusher (usually at 2 o’clock): starts and stops the chronograph.
  • Bottom pusher (usually at 4 o’clock): resets the chronograph hands to zero.

Some watches add a third pusher, for example for split seconds. The layout can differ by brand, so check the watch’s manual to confirm which pusher does what.

How the mechanism works

A chronograph is a separate gear train layered on the watch’s main movement. Here is what happens at each press:

  1. Start: Pressing the top pusher engages a clutch, also called a coupling. The clutch connects the chronograph gear train to the power from the main movement, and the central seconds hand begins to move.
  2. Stop: Pressing the top pusher again disengages the clutch, and the hand stops where it is. The elapsed time is shown on the dial.
  3. Reset: Pressing the bottom pusher returns the chronograph hands to zero. The hands snap back to their starting positions, driven by a small heart-shaped cam.

Because the chronograph has its own gears, the main time display keeps running throughout.

Column wheels and cams

Two main systems control the start, stop and reset actions:

  • Column wheel: A notched, rotating wheel with vertical columns. Its shape moves the levers that start, stop and reset the chronograph. Column wheel chronographs are often considered finer, and many collectors value their crisp, tactile feel when a pusher is pressed.
  • Cam mechanism: A switching cam that can sit in three positions. It is simpler and common, and it works reliably.

Both systems are used in working watches. The difference is mostly in feel and construction.

How to read a chronograph

To time an event:

  1. Press the start pusher. The central seconds hand begins to sweep around the dial.
  2. Press the stop pusher when the event ends. The hand stops and shows the seconds.
  3. Read the subdials for minutes and hours, if the watch has them.
  4. Press the reset pusher to return the hands to zero before the next measurement.

Subdials and layouts

Most chronographs have subdials, which are small counters within the dial. A “tri-compax” layout has three subdials, typically at 3, 6 and 9 o’clock. A “bi-compax” layout has two. Each subdial records a different unit of elapsed time, such as minutes or hours.

The exact layout varies from watch to watch. The Omega Speedmaster, for example, uses its 3 o’clock subdial for a 30-minute counter, 6 o’clock for a 12-hour counter, and 9 o’clock for running seconds. Other models arrange these differently, so check the dial of the specific watch before you read it.

Flyback

A flyback chronograph resets and restarts with a single press of the pusher. A standard chronograph needs separate presses to stop, reset and start again. The flyback mechanism combines those steps, which saves time when you are timing repeated intervals. Pilots and divers often use it for this reason. The flyback function is valued for convenience, and it does not change the basic timing.

Split seconds

A split-seconds chronograph, also called a rattrapante, has two seconds hands that sit one above the other. Both hands start together. Pressing the side pusher stops the lower hand while the upper hand keeps running, so you can read an intermediate time. Pressing the main pusher then stops the upper hand, which records the total time. Pressing the side pusher again releases the lower hand, and it catches up with the upper hand. This lets you time two events that start together, such as a lap and a sector.

Scales on the dial and bezel

Many chronographs have printed scales that turn elapsed time into something more useful:

  • Tachymeter: Measures speed over a fixed distance, such as 1 kilometre or 1 mile. If the hand stops at 60 after a known distance, the average speed was 60 per hour in that unit.
  • Telemeter: Measures distance from a sound or flash, such as lightning and thunder. You start the timer when you see the flash and stop it when you hear the sound.
  • Pulsometer: Times how long a set number of heartbeats takes, usually 15 or 30, to estimate a pulse rate.
  • Regatta scale: Helps sailors time the countdown before a race start.

Modular and integrated chronographs

Chronographs are built in one of two ways. An integrated chronograph is a complete movement designed as a chronograph from the start. A modular chronograph adds a chronograph module on top of a base movement. Integrated chronographs are often considered more stable and are usually more expensive. Modular chronographs can be more affordable, but they may need more work when serviced because the module must be taken apart and reassembled. The choice does not decide whether a watch is good. Compare the watch as a whole.

For the wider family of complications, see the watch complications overview. If you are comparing complications, the tourbillon watches guide covers a different type of mechanism.

The complete guide to complications

Watch Complications Explained: GMT, Moonphase, Tourbillon and More
Read the guide

Keep exploring

Guides from other topics

All topics →