A watch bezel is the ring that surrounds the crystal and holds it in the case. It frames the dial, and on many watches it also carries a scale you can use. Some bezels are fixed and mainly decorative. Others turn, and you use them to time something. Knowing which kind you have tells you what the bezel is for.
What a bezel does
The bezel holds the crystal in place and seals it against the case. On a water-resistant watch, the bezel and crystal are part of the seal that keeps water out. It also sets the look of the watch. A thin bezel gives a dial more room, while a thick or patterned bezel makes a bolder statement.
Some bezels carry markings. A rotating bezel is marked so you can read elapsed time, a second time zone or other values as you turn it.
Fixed bezels
A fixed bezel does not turn. The most common styles are:
- Smooth: A plain ring, often flat or slightly domed. It is common on dress watches and minimal designs.
- Fluted: Vertical ridges run around the bezel. On a rotating bezel the ridges give grip when you turn it. On a fixed bezel they are mainly a styling feature. Fluted bezels appear in steel, gold and other metals.
- Engine-turned: A patterned, textured surface that adds detail without a scale.
- Gem-set: Stones are set into the bezel. This is a jewelry style and is more common on luxury watches.
Some chronographs have a fixed tachymeter scale. It is a speed scale used with the stopwatch: time a known distance, then read the speed at the point the chronograph stops. Fixed scales do not move, so you read them against the chronograph hand.
Rotating bezels
A rotating bezel turns on its axis and usually clicks into position at each step. The click is a spring-loaded detent. It stops the bezel from drifting when you bump it.
Most rotating bezels have a zero mark, often a triangle or a luminous dot, at the 12 o’clock position. To time an interval:
- Turn the bezel so the zero mark lines up with the minute hand at the start.
- As time passes, the minute hand moves across the scale.
- Read the elapsed minutes where the minute hand points.
Rotating bezels come in two types.
- Unidirectional bezels turn only counterclockwise. Most dive watches use them. If the bezel is bumped, it can only move in the counterclockwise direction. That moves the reading so the elapsed time looks longer than it really is. A diver who misreads a bumped bezel then assumes less time is left, which is the safer error.
- Bidirectional bezels turn both ways. They are common on GMT watches, where you may need to set the bezel in either direction, and on some pilot and general-purpose watches.
Dive bezels
A dive bezel is usually marked with a 60-minute scale. Many dive bezels highlight the first 15 or 20 minutes, which is useful for timing decompression stops in recreational diving. The markers often carry luminous material so the zero mark can be seen in low light.
Dive bezel inserts come in a few materials:
- Aluminum was the traditional choice. The markings are printed on the surface, and the color can fade over years of exposure.
- Ceramic resists scratches and keeps its color well.
- Metal bezels with a separate insert are common on higher-end watches.
A dive bezel is a timer. It is not a dive computer and it is not a decompression plan. Dive planning needs proper training, dive tables or a dive computer, and a dive plan.
GMT and 24-hour bezels
A GMT watch has a fourth hand, usually called the GMT hand, which points to a 24-hour scale. It lets you read a second time zone alongside your main time. Many GMT watches add a rotating 24-hour bezel that helps you tell day from night at the second location. Setting the GMT hand and bezel varies by watch, so check the manual before you rely on them.
GMT bezels are usually bidirectional. Pilots and frequent travelers use them most often. A GMT watch is not automatically a dive watch, and water resistance varies from model to model.
Other bezel scales
- Tachymeter: A speed scale on chronographs. You time a known distance and read the speed on the scale.
- Slide rule: Some pilot watches have a circular slide rule on the bezel. The Breitling Navitimer is a well-known example. It is used for flight calculations.
- Compass: Marked with compass points and used with the sun or a known bearing to find direction, though a watch compass is no substitute for a navigation instrument.
- Countdown: A reversed scale that counts down, used in timing such as sailing starts.
Materials
Steel is the most common bezel material. Gold and platinum are used on luxury watches. Ceramic bezels resist scratches well and keep their color. Sapphire is also used for some bezel inserts and is very hard.
Dive watch vs GMT watch
| Feature | Dive watch | GMT watch |
|---|---|---|
| Bezel | Unidirectional, 60-minute scale | Often bidirectional, 24-hour scale |
| Extra hand | Usually none | GMT (24-hour) hand |
| Main purpose | Timing underwater intervals, water resistance | Tracking a second time zone |
| Water resistance | Dive watches are built to a diving standard | Varies; many are not built for diving |
Some watches combine both functions. These are sometimes called GMT dive watches.
Why people wear dive watches without diving
Dive watches are sturdy and easy to read, and the bezel is genuinely useful. Many owners use it to time cooking, parking or a presentation. The bezel is a handy timer even on dry land.
About water-resistance ratings
A water-resistance rating comes from a lab test of how much pressure the watch can take. It is not a safe diving depth. Gaskets age, crystals can crack and a crown left unscrewed can let water in, so a rating can decline over time.
Recreational scuba diving is generally limited to about 40 meters (130 feet). A watch rated to 300 meters does not make deeper diving safe. Dive planning depends on training, a dive computer and an appropriate dive plan.
How to use a rotating bezel
- Check that the zero mark is set correctly before you start timing.
- Turn the bezel with a fingertip, and do not force it past a click.
- Read the elapsed time where the minute hand points.
- If the zero mark has moved, the reading is wrong. Reset the bezel before you rely on it.
The bezel is rotated, not the watch. You turn only the ring, while the hands keep moving.
Frequently asked questions
Which watch has a rotating bezel?
Dive watches, GMT watches and many pilot and sports watches have rotating bezels. Some chronographs also have a rotating timing bezel.
Is a 300-meter watch safe to dive to 300 meters?
No. The rating is a lab test, and it is not a dive plan. Recreational scuba diving is generally limited to about 40 meters, and dive planning needs training and proper equipment.
What is the difference between a dive bezel and a GMT bezel?
A dive bezel is usually a 60-minute, one-way scale for timing intervals. A GMT bezel is usually a 24-hour scale that works with the GMT hand to show a second time zone. Many GMT bezels turn both ways.
For how the bezel fits into the rest of the watch, see the parts of a watch. The crown and bezel both affect water resistance, so how a watch crown works covers the seal on the other side of the case.