Straps and Bands

How do you adjust the size on a watch?

The quick answer to adjusting a watch's size: remove links from a metal bracelet, use clasp micro-adjustments, or move the buckle on a leather or rubber strap.

On this page
  1. The Quick Answer
  2. Identify Your Band
  3. Metal Bracelets
  4. Clasps
  5. Leather and Rubber
  6. NATO and Fabric Straps
  7. Expansion and Mesh Bands
  8. Before You Start
  9. When to Get Help

The Quick Answer

Most watches are resized in one of three ways, depending on the strap:

  • Metal bracelet: Remove links evenly from both sides, then fine-tune the fit at the clasp.
  • Clasp: Move the spring bar to a micro-adjustment hole, or slide a sliding clasp along the band.
  • Leather or rubber strap: Move the buckle to another hole. Some rubber straps can also be trimmed.

Which method applies depends on the band, not on the watch’s brand.

Identify Your Band

Look at the band before you start:

  • Small pins or screws on the inside of a bracelet: metal link bracelet
  • A metal plate that slides, with a small locking flap: sliding clasp
  • Holes along the strap: leather or rubber
  • Woven nylon with a metal ring or keepers: NATO or fabric
  • Flexible links with small tabs or textured sections: expansion band
  • Fine woven metal: mesh band

Metal Bracelets

Put the watch on and count the excess links. Remove an equal number from each side, following the arrows on the underside for the pin direction. Stop if a pin won’t move. The guide to adjusting a watch band has the full steps.

Clasps

Many clasps have a spring bar that sits in one of several holes. Compress the bar, slide it to the next hole, and let it snap in. Sliding clasps are adjusted by lifting the locking flap and moving the clasp. For details, see the metal lock guide.

Leather and Rubber

For leather, move the buckle to another hole. If you need a hole in a new place, a leather hole punch can make a clean one, spaced the same as the existing holes.

Rubber and silicone straps are a different case. Some are designed to be trimmed, and others aren’t. Cutting is permanent, so check first. The rubber strap guide covers the steps.

NATO and Fabric Straps

NATO straps aren’t sized by removing links. You thread the strap through the spring bars, and any extra length is tucked through the keepers. The NATO strap guide covers the threading.

Expansion and Mesh Bands

Expansion bands are sized by opening small tabs and removing links, and mesh bands vary by brand. Both need extra care. See the stretch band guide and the mesh strap guide.

Before You Start

  • Work on a soft surface, and keep every pin, screw, and link together.
  • Don’t force anything. If it doesn’t move, it may need a different method.
  • Remember that removing links and cutting straps are hard to reverse.

When to Get Help

A jeweler or watch service is a good choice for a valuable or vintage watch, a stuck pin, or a band you don’t recognize. If you’re considering a store, Does Walmart do free watch resizing? explains what to check first.

The complete guide to straps and bands

How to Adjust a Watch Band
Read the guide

Keep exploring

Guides from other topics

All topics →