What a moon phase watch shows
A moon phase watch displays the current phase of the moon on its dial, so you can see the moon’s stage without looking at the sky. It is a complication, meaning a function beyond the hours, minutes and seconds. The display is usually a small window in the dial showing a moon that changes shape over the lunar cycle.
The eight phases and what they mean
The moon goes through eight named phases in about 29.5 days:
- New moon: The moon is between the Earth and the Sun, and its lit side faces away from us. It is barely visible.
- Waxing crescent: A thin sliver of light is growing.
- First quarter: Half of the moon is lit. The name refers to the moon’s position in its cycle, not to how much is lit.
- Waxing gibbous: More than half is lit, and the light is still growing.
- Full moon: The whole visible face is lit.
- Waning gibbous: More than half is lit, and the light is shrinking.
- Last quarter: Half is lit again, on the way back to new.
- Waning crescent: A thin sliver is left before the next new moon.
On a moon phase watch, the disc shows the waxing phases first, up to the full moon, then the waning phases back to new.
Why “gibbous” is the name for the middle phases
“Gibbous” comes from a Latin word meaning humped or swollen. It describes a moon that is more than half lit but not yet full, or still more than half lit as it wanes. A moon that is half lit is a quarter moon, and a fuller one is gibbous. The word is the standard name for these two phases.
How a moon phase watch works
Inside the watch, a gear train turns a disc that carries two moon images. The disc sits behind a window in the dial, and only one moon shows at a time. Each moon covers about half of the cycle, which is roughly 29.5 days. Together the two moons take about 59 days to pass the window, which is why most moonphase movements use a gear with 59 teeth. The disc advances about once a day.
Because the mechanism follows a 29.5-day approximation, it does not exactly match the real lunar cycle. That leads to the next question.
How accurate is a moonphase?
A standard moonphase display drifts. The real lunar cycle is about 29.53 days, not 29.5, so the display falls behind by about one day every two to three years. You can correct it by setting the disc back to the right phase.
Astronomical moonphase indicators use a more refined gear ratio. They drift much less, so they need correcting far less often. Expect to adjust any moonphase display from time to time, and check the owner’s manual for how the correction works on your model.
Setting a moon phase watch
The exact method depends on the watch, so follow the owner’s manual. In general:
- Pull the crown to the setting position, or use a separate corrector pusher if the watch has one.
- Adjust the moon disc until the moon shown matches the current phase. Use an online lunar calendar to check today’s phase.
- Set the time and date. On some watches, the date must be set in the right order, so check the manual.
- Push the crown back in and screw it down if it is a screw-down crown.
Is there a luckiest moon phase?
Some people believe certain moon phases bring good luck, and many traditions have their own views. These beliefs are folklore. No scientific evidence shows that one phase affects luck, and a moon phase watch cannot tell you whether a phase is lucky. The watch simply shows where the moon is in its cycle.
Why moon phase watches cost more
A moonphase adds parts to the movement, such as the disc, the gear train and the correction mechanism. Those parts need careful assembly and finishing. Astronomical versions add still more complexity, which increases the cost further. This is why moonphase watches usually cost more than a similar watch without the complication.
For other watches that show the moon, see Which watches show moon phases?. Moonphases also appear in some perpetual calendars, which are covered in the perpetual calendar guide. For the wider family of complications, see the watch complications overview.